Volvo V40 Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
354 Posts
Hi there, I can't answer all your questions, but I can tell you this:
  • for sure you will enjoy the power and torque!!! Who is going to do the remap? Just curious. I was at APEC Deinze.
  • be carefull with bigger wheels: something like a wheel angle limiter might be needed. Check with your Volvo dealer.
  • badges can be removed with dental floss after heating up the badge with a hair dryer. (did it before on other car)
  • on spacers I have no answer, but be carefull with the technical inspection when you need to go there in a few years.
 

·
Registered
Joined
·
354 Posts
You won't regret it. I think this guy at APEC knows what he's doing. On mine there were some strange behaviours with the geartronic and therefore he kept the torque a little bit lower. (220HP/374Nm). But on the manual you can get more. Let me know when it's done!
Where are you from? Maybe I can help with the dental floss. :)
 

·
Registered
Joined
·
354 Posts
Hi DGB64, I don't want to start any discussion on this. :)
I have the 17" Segomo wheels, and I thought I have read somewhere that even then limiters were needed. But these wheels were installed from factory, so I am not sure. Best to check with your Volvo dealer to be sure.
 
1 - 7 of 7 Posts
Top